ELECTRONIC MEASURING DEVICES

TUNZE RO TDS Monitor [8533.000]

000641

€114.00

RO TDS Monitor 8533 is used for the precise determination of the water quality of reverse osmosis units. It continuously measures the conductivity in ppm at the water inlet / water outlet of reverse osmosis units and provides information on the necessity of a filter or membrane change.

View

ELECTRONIC MEASURING DEVICES

Hanna Test Reagents Phosphate 100 pcs.

000643

€35.00

View

ELECTRONIC MEASURING DEVICES

TUNZE Water level alarm [7607/2]

000657

€183.00

comes with three sensors, a run-dry sensor and two overflow sensors. Each sensor comes with a holding device which can be attached with silicone or can be clamped to horizontal or vertical panes. The holding devices can also be combined. The control unit has an optical indicator for each sensor and an alert sound emitter. The switched socket outlet has a...

View

ELECTRONIC MEASURING DEVICES

TUNZE RO water controller (8555.100)

000658

€118.00

TUNZE® RO Water Controller 8555 is an automatic water level controller used in the collection container of TUNZE® RO station. The controller is also suitable for other water tanks or can be connected to an automatic refill system. It consists of a controller, two sensors, a water valve and an 12 V power supply unit. Depending on the use, the water valve...

View

ELECTRONIC MEASURING DEVICES

TUNZE Switched Socket Outlet [3150.110]

000659

€77.80

In the Osmolator®, the enclosed low-voltage centrifugal pump can be replaced by this switched socket outlet in combination with a more powerful pump. The switched socket outlet can be used to switch metering pumps with 230 V (115 V), max. 1,800 W (900 W), such as Turbelle® e-jet, Silence 1073.020, 1073.040 or a peristaltic pump.

View

ELECTRONIC MEASURING DEVICES

TUNZE pH/CO2 controller set [7074/2]

000663

€405.00

consisting of pH controller 7070/2 and CO2 valve set 7074.110 with power supply unit 5012.010. The 12 Volt valve is nickel-plated and protected against corrosion.The adjustable time-interval meter permits the controlled distribution of CO2, preventing an overdose.The control station operates on safety extra-low voltage.

View